TS100

The TS100 system has been designed for damping the top and bottom surfaces of the mat as it travels along the forming line. A damper surface helps the heat to penetrate through the board more rapidly during the pressing process, resulting in faster cure times and shorter press cycles. The system consists of a beam on which the centrifugal spraying rotors are mounted and a liquid dosing and recycling unit.

Proudly made by

Best in class for

WOOD BASED PANELS

PB/SPB, MDF/HDF, OSB/LSB/FOSB

Main features

Assembly made from steel and corrosive resistant materials
Accurate mixing of water and additive
Electronic control of the exact amount of solution to be sprayed and recycled
Sophisticated water purification system included
Solution sprayed by means of centrifugal force
Electronic control may be implemented with Siemens PLC (Profibus, Profinet and Ethernet) or Allen-Bradley PLC (Control net and Ethernet) upon request
May be used for all kinds of boards
Equipment conforming to Directive 94/9/CE ATEX 95 requirements and suitable for Zone 22 installation (based on Directive 99/92/CE ATEX 137), i.e. intended for use in potentially explosive environments due to the presence of dust

Advantages

Improved quality and increase in production rates
Decrease in surface porosity, making the board easier to sand
Improved mechanical properties of the board with a smoother and harder surface
Better glass-like sheen to the surface to facilitate the coating process

Gallery

Technical features

TECHNICAL DATA
NUMBER OF ROTORS	Max 20
TOTAL SPRAYING SPAN	Max 3800 mm
MAX. FLOW FOR EACH ROTOR	800 g/min
RELEASE AGENT CONCENTRATION	Min 0.2%
MIN. DIFFERENCE IN HEIGHT BETWEEN SPRAYING UNIT AND PUMPING UNIT	1500 mm
RATED POWER	7.5 kW
THREE-PHASE ELECTRICAL SUPPLY	400/440 V - 50/60 Hz
CONTROL CIRCUIT VOLTAGE	230/120 V - 50/60 Hz