DYNADRYER

Belt dryers are able to dry particles up to a moisture content of less than 1%. They may be used in PB and OSB panel production, PELLET production, PALLET BLOCK production.
DOWNLOAD TECHNICAL SHEET

PROUDLY MADE BY

Best in class for

WOOD BASED PANELS

PB/SPB, OSB/LSB/FOSB
PRESSED WOOD PACKAGING
PALLET BLOCKS, PRESSED PALLETS
PELLET & ENERGY
WOOD PELLETS AND BLACK PELLETS

Technical features

  • Belt dryers are able to dry particles up to a moisture content of less than 1%. They may be used in PB and OSB panel production, PELLET production, PALLET BLOCK production.
  • In the case of existing dryers, where the intention is to increase the amount of particles dried, belt dryers may be used both as a pre-dryer, when mounted prior to the existing dryer, as well as a dryer when installed parallel to the existing one.
  • Belt dryers may be single stage, two-stages or three-stages (one above the other).

Gallery

P135_Essiccatoio
Drying-referenza-imal

Watch the video

Technical features

TECHNICAL ADVANTAGES
LOW TEMPERATURE PROCESS
VERY LOW FIRE RISK (TEMPERATURE <100°C)
NO CHANGE IN STRAND COLOUR
LOW DUST EMISSION < 5 mg/Nm3
VERY LOW VOCS EMISSION
HOMOGENEOUS DRYING PROCESS
FULLY AUTOMATIC PROCESS
EASY FUTURE EXPANSION
AUTOMATIC BELT CLEANING (WATER & AIR)

INTERNAL NET WIDTH
1.5 mt
3.0 mt
4.5 mt
6.0 mt
8.0 mt
SINGLE DECK - WATER EVAPORATION*
UP TO 19 ton/h
* In relation to the operative conditions: inlet moisture, ambient conditions, type of energy available

DOUBLE DECK - WATER EVAPORATION*
UP TO 38 ton/h
* In relation to the operative conditions: inlet moisture, ambient conditions, type of energy available

TRIPLE DECK - WATER EVAPORATION*
UP TO 57 ton/h
* In relation to the operative conditions: inlet moisture, ambient conditions, type of energy available

Related products

Do you have any questions about this product?

Linkedin Youtube