DYNAPELLETPRESS

PROUDLY MADE BY

Best in class for

PELLET & ENERGY

WOOD PELLETS AND BLACK PELLETS

Die diameter up to 1200 mm
Die width up to 180 mm
Main structure made in considerable steel thickness
Driving pulley installed on a countershaft between two separate support, coupled to the main motor by anelastic-block coupling
Machine door entirely made in stainless steel inox AISI 304, with two knives
Feed chute made in stainless steel inox AISI 304 with choke with quick dump controlled by a pneumatic cylinder
A permanent magnet is fitted in the chute to avoid ferrous metal entering in the die
Rotor group composed of a die holder mounted on the main shaft by means of two bearings able to withstand high work loads and high temperature
Segmented die clamp makes bolt alignment easy, facilities fast die change
Main shaft mounted on the basement by means of bronze bushes
Bearings lubrication is guarantee from an internal circuit that work also when machine is working
Pellet mill is driven by an electric motor via a V-belt transmission.

Constant production quality
Less generation of Dust and broken pellets
Longer life time of dies and pressure rolls, because there is no friction/cutting effect
Higher capacity can be possible by increasing dies rolls diameter and holes track width
Less specific energy consumption 88 kWh/t in a medium pellet press capacity.

MODEL	DIAMETER mm	DIE TRACKS mm	OVERALL DIMENSIONS mm			CAPACITY MATERIAL* t/h		INSTALLED POWER kW		WEIGHT APPROX. without motor kg
MODEL	DIAMETER mm	DIE TRACKS mm	A	B	C	SOFT	HARD	M1	M2	WEIGHT APPROX. without motor kg
DPP.500	500	60	4400	2045	2300	1.3 - 1.5	1 - 1.2	110 - 132	5.5	6000
DPP.630	630	80	4400	2045	2450	2.1 - 2.6	1.6 - 2	200 - 250	5.5	9000
DPP.750	750	95	4500	2245	2550	2.8 - 3.5	2.2 - 2.7	250 - 315	5.5	13000
DPP.835	835	125	4500	2245	2750	4.8 - 5.4	3.9 - 4.4	315 - 355	11	16000
DPP.950	950	153	4972	2525	2900	7.1 - 8	6 - 6.8	400 - 450	11	22000
DPP.1200	1200	180	5400	2900	3500	10 - 12.5	8 - 10	500 - 630	11	32000
*Based on ø 6 mm Pellet